Where's Radiology?

The Hospital was selling patient room benches for $10.00 each. I thought that was a fabulous deal, so I bought 4 of them. When I told my husband he needed to help me get them home he said "4 of them! What are you going to do make our house look like the radiology department? How cute is he!

These little bad boys are going to the Lake house. This is the best "before" photo I have, but you can tell they have huge potential!

First things first. This purple material has to go! I wasn't sure I would use the foam but the material was vinyl lined so I felt comfortable reusing the foam. It was in great shape too! Bonus!!!

Never refuse help! My Hubby helped me remove about 1000 staples! OK slight exaggeration..

After a good sanding and cleaning I used my Black stain

The wood is red oak so the red bleeds thru a little. I actually like it. It almost looks like a black cherry color. Three coats of polyurethane and this one is done.

Since this is going in my husbands "man cave" aka the pool room. The material can't be too girly.

You can't go wrong with black and teeny tiny little tan polka dots.

And there it is all done. I love the low back and how it sits beneath the window seal. I think it looks like a Pier One Import style sofa/bench.

Uh Oh, how do I center this? I don't! Just make another one! Not too girly, not too many pillows for a "man couch" and NOT at all  like the radiology department! He likes them, I love them! What do you think?

I can't wait for you to see what I'm going to do with the other 2!http://funwithnancy.blogspot.com/

Pool anyone?

I get a phone call one day and the hubby is all excited about a good deal on a really good pool table ($300.00) and it has real Italian slate too! To be honest all I heard was "blah blah blah" $300.00. What's a girl who has no cue (pun intended) about pool suppose to do? Great honey!!! Let's buy it!

Oh...Okay, I guess, but it's kinda of ugly honey. Oh, it's only temporary until we can afford a much nicer one (he said). Well then...Okay (I said)!

But honey, It's just so...UGLY!!! What? you want to know if I can jazz it up a little?

Well, Let's see...Yup, all I need are a few supplies, and one of these....My brother Sam and some power tools.

I started this little project with a trip to Lowe's & Home Depot. I bought 2 sizes of rope trim. The table already had trim work, but it was too boring. I put small rope trim between the old trim. Sam cut the 45 degree angles and we used a air compressor to nail it on.

The table will have lion heads and swags.

The end caps are just a little too short to fit 2 swags and the disk that will hold the lions head. So, we just cut off some of the flower on the end of the swag to make it fit. Notice the line across the table. That line indicates how far down the side rails will hang so I can properly center the swags.

The legs were just as ugly as the base so they got a larger rope trim and fun little swirly appliques on 3 sides. The forth side gets a wood disc for the lion head.

And there he is! Mr Lion head. I center him then trace around him.

Now it's time for my least favorite part. Sanding and filling in all the holes with wood filler, then repeat the sanding to get everything smooth.

No, I didn't screw up my pictures! This is how I'm going to get the lion heads onto the wooden discs. The manufacture said I could use wood glue or steam them on. I of course thought it would be fun to steam them on! I told you I was fun!!!

The manufacture stated that steaming them on was more secure than wood glue and I didn't want to take any chances since the lion heads cost $200.00.

OK, water is boiling and steaming thru the canvas. I got the canvas at Hobby Lobby in the art supply department (only cost about 3.00). The lion heads contain hide glue which gets soft when its heated.

Once the lion head is applied to freshly sanded raw wood, it bonds to the wood. So cool! I taped them just to make sure they dried in place. Working upside down is a fun all in it's own category.

One lion head on each leg, one on each end of the table, and two on each side. Ten lions total.

Swags on. Lion heads on.

Tape off. Lion heads bonded! Yeah.....

All done with the sawing, gluing, filling, measuring. This is what the table looked like before lion heads. Already a major improvement!

Just a reminder that you must mark off where the side rails go or else your appliques will not be centered when you turn over the table & put the side rails on (you wouldn't know this until the very end and that would be horrible)

Here is a view of the leg with all the appliques, rope trim, lion head, and wood filler.

Next step is primer. It never looks good, but it is a must. Especially since the table was covered with a wood laminate. Notice the spoiled chihuahua on her princess pillow.

Everything gets primed.

primered legs. I love this step because it all starts looking like a whole design instead of "parts".

Two coats of paint in your desired color. This is Sherwin Williams 6107 Nomadic Desert. I used it because it was left over from painting some of the interior walls.

Table gets two coats too.

The next steps are really fun. I love the results! All you do is mix 1/2 stain plus 1/2 Faux Glaze.

I mixed 1/4 cup glaze + 1/4 cup Black Walnut water based stain on a foam plate and painted it on. Then I got a plastic grocery store bag, waded it up and just started jabbing it until I found a pattern I liked. Do this on a trial area first. I always use scrap wood and play with finishes. If you really want to see a video of this technique go to you tube and search faux painting.

When it dries, apply one coat of polyacrylic spray (I use minwax). When that dries we can add the hang up and shading. Where almost done!

Once the glaze/stain dries and you have applied one coat of polyacrylic you can now add hang-up and some shading for depth.

use undiluted stain, in this case the Black Walnut water based stain. Apply it on the rope trim, wipe off. Then paint a thin layer around the appliques and using a cheep dry paint brush, start jabbing the stain to "smear it" or soften the look.

All highlighted and smudged up. If you try to do this without the one coat of polyacrylic between the glaze/stain step I assure you, you will regret it! Major mistake!!!! You will remove the previous step and end up with a mess! But look at it from the point of view that you get to start over and learn! :(. Do yourself a big favor! Don't skip that step :)

See how much depth you get. I also wipe some of the stain over the applique to give it hang-up. Notice how this brings out all of the detailed work on the appliques.

The lion head and swags just pop with detail once the hang-up is applied. Simply spray the last 2 coats of polyacrylic to give it a long lasting finish. I used Minwax clear gloss polyacrylic spray.

This was actually the hardest step of all. Each side rail has 3 rail sights (used by the pool player to line up his/her shot) and I had to cover them with tape. Once they are painted the only way to get the tape off is to cut it out. OMG! this sucked!!!! But once I got them all off it was easy again. All I had to do when I applied the glaze/stain was to wipe the sights clean with a damp paper towel (while the glaze was wet, so you still have to be very careful).

side rails with sights all cut out

Once the side rails, ball pockets, and felt are added the table is done!

Not too bad for an amateur! I think the table looks amazing and now we don't have to use it as a temporary table. Total cost $1000.00! (300 for the table, 200 for lion heads, 100 for swags & rope trim, 400 to have it put together, re-felted, and leveled).

Honey, I hope you like your new pool table with that Italian slate you were so glad to get! I know I love it! Who called it ugly??

$100 poker table

Sarina & Ponch were really excited to get an Armini's used poker table for $100.00. I was really excited to get the phone call that they didn't want it because it was all scratched up!

It was painted a dark cherry color and had a really heavy coat of varnish. I couldn't tell what kind of wood it was. I tried to sand it but it was just to thick.

So, for the first time ever I decided to use paint remover. I picked a low odor brand. You have to wear goggles, mask, and heavy plastic gloves.

I was actually very suprised how easy it was. It does get messy. Sometimes you have to repeat the process.

I used paper shop towels, and a plastic scraper. It is amazing that it actually strips down to the bear wood! You have to rub it with mineral spirits to remove all of the stipper. So it gets really stinky!.

And to my delight! It's Mahogony wood! Jackpot!!!!! no pun intended!

Because the top part of this table (which comes off and the table becomes a craps or blackjack table too) has an ugly yellow rubber edge (as seen above) I decided to paint the top a sage green and stain it with black walnut. To make it fun I added hearts, clubs, spades, and diamonds. I also painted a fringe around the center leather.

I think it looks great!

I stained the rest of the table with left over Beachnut by Sherwin Williams from my cabinets, and accented it with a black acrylic paint (in the grooves).

It then recieved 3 coats of polyurethane in Semi-Gloss. I know Mahogany is typically stained with red type stains but I just wasn't feeling it. I think it looks great this color.

The chairs have coaster rollers and swivel and rock! I am very happy with the end results!

The table was missing one of the cup holders. I searched high and low on the net for a replacement piece and they just don't make this size anymore. So....I painted it black.

Not bad for a $100.00 poker table huh! Sorry Sarina and Ponch you can not have it back! So sad!

Poker anyone?